Official Series Description


Lab Data Summary

Aggregate lab data for the KEVIN soil series. This aggregation is based on all pedons with a current taxon name of KEVIN, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to KEVIN were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
5288P035087MT101002Kevin6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties48.6191673,-111.7980576

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the KEVIN soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the KEVIN series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the KEVIN series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the KEVIN series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with KEVIN share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the KEVIN series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the KEVIN series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Soil series sharing subgroup-level classification with KEVIN, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing KEVIN as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Scobey-Kevin clay loams, 0 to 4 percent slopes561B2438233439862t3kbmt04119941:24000
Kevin-Hillon clay loams, 2 to 8 percent slopes441C596433439552t071mt04119941:24000
Phillips-Kevin complex, 0 to 4 percent slopes334B543883439102sy83mt04119941:24000
Kevin-Elloam complex, 2 to 8 percent slopes442C151803439572vyr4mt04119941:24000
Scobey-Kevin clay loams, 2 to 8 percent slopes561C63563439872t3k4mt04119941:24000
Hillon-Kevin clay loams, 4 to 15 percent slopes221D58273438762t072mt04119941:24000
Scobey-Kevin clay loams, 0 to 4 percent slopes561B926893442272t3kbmt05119921:24000
Kevin-Hillon clay loams, 2 to 8 percent slopes441C300783442062t071mt05119921:24000
Kevin-Elloam complex, 2 to 8 percent slopes442C164773442082vyr4mt05119921:24000
Hillon-Kevin clay loams, 8 to 25 percent slopes221E62483441542t073mt05119921:24000
Sunburst-Kevin clay loams, 4 to 15 percent slopes92D40313442792sy80mt05119921:24000
Scobey-Kevin clay loams, 2 to 8 percent slopes561C25763442282t3k4mt05119921:24000
Kevin-Hillon-Nishon complex, 0 to 25 percent slopes445E2125344210ck5kmt05119921:24000
Sunburst-Kevin clay loams, 4 to 15 percent slopes12922083443262sy80mt05519811:24000
Kevin-Sunburst clay loams, 2 to 8 percent slopes1288353443252vyt8mt05519811:24000
Scobey-Kevin clay loams, 0 to 4 percent slopes561B894793452172t3kbmt10119921:24000
Phillips-Kevin complex, 0 to 4 percent slopes332B640543451322sy83mt10119921:24000
Kevin-Hillon clay loams, 2 to 8 percent slopes441C141633451792t071mt10119921:24000
Scobey-Kevin clay loams, 2 to 8 percent slopes561C56013452182t3k4mt10119921:24000
Hillon-Kevin clay loams, 8 to 25 percent slopes22E41953451032t073mt10119921:24000
Sunburst-Kevin clay loams, 4 to 15 percent slopes53D36693452122sy80mt10119921:24000
Kevin-Elloam complex, 2 to 8 percent slopes446C20893451862vyr4mt10119921:24000
Phillips-Kevin complex, 2 to 8 percent slopes492892063455662vyr1mt10519761:24000
Scobey-Kevin clay loams, 2 to 8 percent slopes571306113455752t3k4mt10519761:24000
Sunburst-Kevin clay loams, 4 to 15 percent slopes59807423455772sy80mt10519761:24000
Hillon-Kevin clay loams, 4 to 15 percent slopes5843403455762t072mt10519761:24000
Scobey-Kevin loams, undulatingSk332201469344xwtmt60019691:24000
Zahl complex, hillyZA53761469744xy3mt60019691:24000
Scobey-Kevin clay loams, 2 to 8 percent slopesSh44991469332t3k4mt60019691:24000
Kevin loam, 4 to 8 percent slopesKb18091468354xsmmt60019691:24000
Scobey-Kevin clay loams, 0 to 4 percent slopesKc17171468362t3kbmt60019691:24000
Kevin loam, 2 to 4 percent slopesKa13451468344xslmt60019691:24000
Hillon-Kevin clay loams, 4 to 15 percent slopesKe4891468382t072mt60019691:24000
Scobey-Kevin clay loams, 2 to 8 percent slopes110935713462552t3k4mt60819761:24000
Hillon-Kevin clay loams, 8 to 25 percent slopes68743443465172t073mt60819761:24000
Kevin-Elloam complex, 2 to 8 percent slopes73524493465292vyr4mt60819761:24000
Phillips-Kevin complex, 2 to 8 percent slopes100400343462422vyr1mt60819761:24000
Phillips-Kevin complex, 0 to 4 percent slopes99260343465832sy83mt60819761:24000
Scobey-Kevin clay loams, 0 to 4 percent slopes109189343462532t3kbmt60819761:24000
Hillon-Kevin clay loams, 4 to 15 percent slopes74124363465302t072mt60819761:24000
Scobey-Kevin clay loams, 0 to 4 percent slopes17471223418392t3kbmt61319751:24000
Scobey-Kevin clay loams, 2 to 8 percent slopes11321253417722t3k4mt61319751:24000
Hillon-Kevin clay loams, 4 to 15 percent slopes1127253417712t072mt61319751:24000
Scobey-Kevin clay loams, 0 to 4 percent slopes561B1779843468322t3kbmt61519921:24000
Scobey-Kevin clay loams, 2 to 8 percent slopes561C675243468332t3k4mt61519921:24000
Kevin-Hillon clay loams, 2 to 8 percent slopes441C383143467742t071mt61519921:24000
Hillon-Kevin clay loams, 8 to 25 percent slopes221E312693466352t073mt61519921:24000
Kevin-Elloam complex, 2 to 8 percent slopes442C73853467762vyr4mt61519921:24000
Phillips-Kevin complex, 0 to 4 percent slopes334B48263466962sy83mt61519921:24000
Hillon-Kevin clay loams, 4 to 15 percent slopes444D37923467772t072mt61519921:24000
Kevin-Elloam complex, 2 to 8 percent slopes502C2174723477362vyr4mt64119941:24000
Scobey-Kevin clay loams, 2 to 8 percent slopes563C1838753477532t3k4mt64119941:24000
Kevin-Scobey-Phillips association, 2 to 15 percent slopes1441D132313347603cnq0mt64119941:24000
Hillon-Kevin clay loams, 4 to 15 percent slopes221D336983476352t072mt64119941:24000
Kevin-Scobey-Nishon association, 0 to 25 percent slopes1443E32569347604cnq1mt64119941:24000
Phillips-Kevin complex, 2 to 8 percent slopes334C322703476792vyr1mt64119941:24000
Sunburst-Kevin clay loams, 4 to 15 percent slopes921D291983478022sy80mt64119941:24000
Kevin-Sunburst clay loams, 2 to 8 percent slopes444C265543477242vyt8mt64119941:24000
Hillon-Kevin clay loams, 8 to 25 percent slopes221E190503476362t073mt64119941:24000
Kevin-Phillips-Elloam association, 2 to 15 percent slopes1333C12719347593cnppmt64119941:24000
Kevin-Hillon clay loams, 2 to 8 percent slopes442C66333477202t071mt64119941:24000
Kevin-Sunburst very gravelly clay loams, 8 to 15 percent slopes446D5548347728cnv1mt64119941:24000
Sunburst-Kevin gravelly clay loams, 2 to 8 percent slopes923C4820347805cnxjmt64119941:24000
Scobey-Kevin clay loams, 0 to 4 percent slopes164B2054833483802t3kbmt65719901:24000
Scobey-Kevin clay loams, 2 to 8 percent slopes263C1477563485062t3k4mt65719901:24000
Kevin-Hillon clay loams, 2 to 8 percent slopes163C270123483782t071mt65719901:24000
Hillon-Kevin clay loams, 4 to 15 percent slopes163D215123483792t072mt65719901:24000

Map of Series Extent

Approximate geographic distribution of the KEVIN soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .