Official Series Description


Lab Data Summary

Aggregate lab data for the HOOSIC soil series. This aggregation is based on all pedons with a current taxon name of HOOSIC, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to HOOSIC were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
144A40A407864NH015003Hoosic3Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties43.0172234,-70.8272247
144A40A407964NH015004Hoosic4Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties43.044445,-70.8922195
1451980MA015004S1980MA015004Hoosic4Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties42.3256194,-72.43725

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the HOOSIC soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the HOOSIC series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the HOOSIC series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the HOOSIC series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with HOOSIC share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the HOOSIC series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the HOOSIC series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with HOOSIC, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. MA-2012-02-01-08 | Berkshire County - February 1988

    Typical pattern of soils and parent material in the Copake-Hero-Hoosic general soil map unit (Soil Survey of Berkshire County, Massachusetts; February 1988).

  2. NH-2012-02-14-02 | Cheshire County - June 1989

    Typical landscape pattern of soils and underlying material in the Windsor-Agawam-Hoosic general soil map unit (Soil Survey of Cheshire County, New Hampshire; June 1989).

  3. NH-2012-02-14-20 | Rockingham County - October 1994

    Typical pattern of soils and parent material in the Hoosic-Paxton-Eldridge general soil map unit (Soil Survey of Rockingham County, New Hampshire; October 1994).

  4. NY-2012-02-15-15 | Columbia County - June 1989

    Typical pattern of Pittstown, Bernardston, Nassau, and Manlius soils on uplands and Hoosic soils on outwash plains (Soil Survey of Columbia County, New York; June 1989).

Map Units

Map units containing HOOSIC as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Hoosic gravelly fine sandy loam, 3 to 8 percent slopes272B303327660198tmma00319841:25000
Hoosic gravelly fine sandy loam, 0 to 3 percent slopes272A186027660098tlma00319841:25000
Hoosic gravelly fine sandy loam, 8 to 15 percent slopes272C119627660298tnma00319841:25000
Hoosic gravelly fine sandy loam, 15 to 25 percent slopes272D64627660398tpma00319841:25000
Hoosic gravelly fine sandy loam, 15 to 50 percent slopes510E11092796819d0znh00519851:20000
Hoosic gravelly fine sandy loam, 3 to 8 percent slopes510B9212796799d0xnh00519851:20000
Hoosic gravelly fine sandy loam, 8 to 15 percent slopes510C5532796809d0ynh00519851:20000
Hoosic gravelly fine sandy loam, 3 to 8 percent slopes510B62452793459cp4nh01519861:24000
Hoosic gravelly fine sandy loam, 0 to 3 percent slopes510A26842793449cp3nh01519861:24000
Urban land-Hoosic complex, 3 to 15 percent slopes59918362793559cpgnh01519861:24000
Hoosic gravelly fine sandy loam, 8 to 15 percent slopes510C12272793469cp5nh01519861:24000
Hoosic gravelly fine sandy loam, 15 to 35 percent slopes510D1582793479cp6nh01519861:24000
Hoosic gravelly sandy loam, 0 to 3 percent slopesHoA51362903389r3rny02119851:15840
Hoosic gravelly sandy loam, rollingHoC40252903409r3tny02119851:15840
Hoosic gravelly sandy loam, 3 to 8 percent slopesHoB31292903399r3sny02119851:15840
Hoosic and Blasdell soils, steepHpE24172903429r3wny02119851:15840
Hoosic gravelly sandy loam, hillyHoD13542903419r3vny02119851:15840
Hoosic gravelly loam, undulatingHsB124202906739rgkny02719921:24000
Hoosic gravelly loam, nearly levelHsA104942906729rgjny02719921:24000
Hoosic gravelly loam, rollingHsC36652906749rglny02719921:24000
Hoosic gravelly loam, hillyHsD13402906759rgmny02719921:24000
Hoosic-Urban land complex, nearly levelHuA11932906799rgrny02719921:24000
Hoosic gravelly loam, 25 to 45 percent slopesHsE8492906769rgnny02719921:24000
Hoosic channery loam, fan, 3 to 8 percent slopesHtB8482906789rgqny02719921:24000
Hoosic channery loam, fan, 0 to 3 percent slopesHtA4932906779rgpny02719921:24000
Hoosic-Urban land complex, undulatingHuB3702906809rgsny02719921:24000
Hinckley-Hoosic cobbly sandy loams, 0 to 8 percent slopesHoB12052918439sp9ny04519811:15840
Hinckley-Hoosic cobbly sandy loams, 15 to 35 percent slopesHoE3002918449spbny04519811:15840
Hoosic gravelly sandy loam, 3 to 8 percent slopesHoB81262939299vvlny07119761:15840
Hoosic gravelly sandy loam, 8 to 15 percent slopesHoC34902939309vvmny07119761:15840
Hoosic gravelly sandy loam, 15 to 25 percent slopesHoD20002939319vvnny07119761:15840
Hoosic gravelly sandy loam, 0 to 3 percent slopesHoA8512939289vvkny07119761:15840
Otisville and Hoosic soils, steepOVE6442939469vw4ny07119761:15840
Hoosic gravelly sandy loam, 3 to 8 percent slopesHoB92802931709v23ny08319801:15840
Hoosic gravelly sandy loam, rollingHoC76522931719v24ny08319801:15840
Hoosic gravelly sandy loam, hillyHoD62992931729v25ny08319801:15840
Hoosic gravelly sandy loam, 0 to 3 percent slopesHoA25552931699v22ny08319801:15840
Hoosic gravelly sandy loam, steepHoE24252931739v26ny08319801:15840
Hoosic gravelly sandy loam, undulatingHoB16312943849wb8ny09119931:24000
Hoosic gravelly sandy loam, rollingHoC8112943859wb9ny09119931:24000
Hoosic gravelly sandy loam, nearly levelHoA6482943839wb7ny09119931:24000
Hoosic gravelly loam, rollingHgC84032954829xgpny11119741:15840
Hoosic gravelly loam, 3 to 8 percent slopesHgB79272954819xgnny11119741:15840
Hoosic soils, very steepHSF26432954849xgrny11119741:15840
Hoosic gravelly loam, 0 to 3 percent slopesHgA24292954809xgmny11119741:15840
Hoosic gravelly loam, 15 to 25 percent slopesHgD19972954839xgqny11119741:15840
Hoosic cobbly loam, 0 to 3 percent slopesHfA7902954799xglny11119741:15840
Hoosic gravelly sandy loam, 0 to 3 percent slopesHoA78212959779xznny11519721:20000
Hoosic gravelly sandy loam, 3 to 8 percent slopesHoB72542959789xzpny11519721:20000
Hoosic gravelly sandy loam, rolling and hillyHSDK56232959669xz9ny11519721:20000
Hoosic and Otisville soils, steep and very steepHTF28422959679xzbny11519721:20000
Hoosic gravelly sandy loam, 8 to 15 percent slopesHoC26992959799xzqny11519721:20000

Map of Series Extent

Approximate geographic distribution of the HOOSIC soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .