Soil Data Explorer - ELKADER

Official Series Description

Lab Data Summary

Aggregate lab data for the ELKADER soil series. This aggregation is based on all pedons with a current taxon name of ELKADER, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to ELKADER were used in the calculation. Source: KSSL snapshot (updated 2020-03-13). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Pedons used in the lab summary:

MLRA	Lab ID	Pedon ID	Taxonname	CI	NSSL / NASIS Reports	Link To SoilWeb GMap
72	81P0655	S1981KS063001	ELKADER	7	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	38.7555542,-100.4291687
72	07N0193	S2007KS109022	Elkader	8	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	38.7571106,-100.8413086

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the ELKADER soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the ELKADER series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-10-24), parsed OSD records (updated 2024-10-23) and snapshot of SC database (updated 2024-10-23).

Select annual climate data summaries for the ELKADER series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the ELKADER series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with ELKADER share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2024-10-23) and snapshot of the SC database (updated 2024-10-23).

Select annual climate data summaries for the ELKADER series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the ELKADER series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with ELKADER, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2024-10-23).

Block Diagrams

No block diagrams are available.

Map Units

Map units containing ELKADER as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Elkader silt loam, 1 to 3 percent slopes	1605	16833	1150667	307pk	ks063	1974	1:24000
Elkader and Manvel silt loams, 6 to 15 percent slopes	1603	15952	1150666	307ph	ks063	1974	1:24000
Elkader silt loam, 3 to 6 percent slopes	1606	15699	1150668	2wz9v	ks063	1974	1:24000
Elkader and Manvel silt loams, 6 to 15 percent slopes	1691	7507	1152026	307ph	ks101	1966	1:24000
Elkader silt loam, 1 to 3 percent slopes	1605	357	1152017	307pk	ks101	1966	1:24000
Elkader silt loam, 3 to 6 percent slopes	1606	281	1152018	2wz9v	ks101	1966	1:24000
Elkader silt loam, 6 to 15 percent slopes	1607	9229	1150517	307pm	ks109	1962	1:24000
Elkader silt loam, 3 to 6 percent slopes	1606	8259	1150516	2wz9v	ks109	1962	1:24000
Elkader silt loam, 1 to 3 percent slopes	1605	5279	1150515	307pk	ks109	1962	1:24000
Elkader silt loam, 0 to 1 percent slopes	1604	993	1150514	307pj	ks109	1962	1:24000
Elkader and Manvel silt loams, 6 to 15 percent slopes	1603	491	1150513	307ph	ks109	1962	1:24000
Elkader and Manvel silt loams, 6 to 15 percent slopes	1603	463	1150842	307ph	ks195	1986	1:24000
Elkader silt loam, 3 to 6 percent slopes	1606	230	1150844	2wz9v	ks195	1986	1:24000
Elkader silt loam, 1 to 3 percent slopes	1605	90	1150843	307pk	ks195	1986	1:24000
Elkader silt loam, 3 to 6 percent slopes	1606	881	1150193	2wz9v	ks199	1984	1:24000
Elkader silt loam, 1 to 3 percent slopes	1605	247	1150192	307pk	ks199	1984	1:24000

Map of Series Extent

Approximate geographic distribution of the ELKADER soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2024-10-30).