Soil Data Explorer - BROLLIAR

Official Series Description

Lab Data Summary

Aggregate lab data for the BROLLIAR soil series. This aggregation is based on all pedons with a current taxon name of BROLLIAR, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to BROLLIAR were used in the calculation. Source: KSSL snapshot (updated 2020-03-13). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Pedons used in the lab summary:

MLRA	Lab ID	Pedon ID	Taxonname	CI	NSSL / NASIS Reports	Link To SoilWeb GMap
39	40A3581	S1956AZ005008	Brolliar	3	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	34.8483315,-111.4375
39	40A3582	S1956AZ005009	Brolliar	3	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	34.833889,-111.434166

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the BROLLIAR soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the BROLLIAR series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-10-24), parsed OSD records (updated 2024-10-23) and snapshot of SC database (updated 2024-10-23).

Select annual climate data summaries for the BROLLIAR series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the BROLLIAR series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with BROLLIAR share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2024-10-23) and snapshot of the SC database (updated 2024-10-23).

Select annual climate data summaries for the BROLLIAR series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the BROLLIAR series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 3D mountains figure.

Soil series sharing subgroup-level classification with BROLLIAR, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2024-10-23).

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

1. AZ-2011-05-27-04 | Beaver Creek Area - 1967

   Typical section of soils, upper part of Beaver Creek Area. Elevations range from 3,800 feet to 8,500 feet (Soil Survey of Beaver Creek Area, Arizona; 1967).

2. AZ-2011-05-27-23 | Long Valley Area - 1974

   Typical patterns of soil in area south of East Clear Creek (Soil Survey of Long Valley Area, Arizona; 1974).

Map Units

Map units containing BROLLIAR as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Brolliar very stony silt loam, 0 to 15 percent slopes	BsC	5357	52828	1rz4	az637	1968	1:31680
Brolliar very stony silt loam, 15 to 30 percent slopes	BsD	1590	52829	1rz5	az637	1968	1:31680
Brolliar stony clay loam, 0 to 10 percent slopes	BoB	31504	1545281	1nvzs	az641	1965	1:31680
Brolliar silt loam, deep	Bn	8449	1545284	1nvzw	az641	1965	1:31680
Brolliar very stony loam, 0 to 10 percent slopes	BrB	7215	1545278	1nvzp	az641	1965	1:31680
Brolliar stony clay loam, 10 to 20 percent slopes	BoC	5920	1545282	1nvzt	az641	1965	1:31680
Brolliar very stony loam, 10 to 20 percent slopes	BrC	2305	1545280	1nvzr	az641	1965	1:31680
Brolliar clay loam and alluvial land	Bu	601	1545286	1nvzy	az641	1965	1:31680
Brolliar very rocky complex	Bp	480	1545288	1nw00	az641	1965	1:31680
Brolliar stony clay loam, 20 to 30 percent slopes	BoD	401	1545283	1nvzv	az641	1965	1:31680
Brolliar very stony loam, 20 to 30 percent slopes	BrD	254	1545279	1nvzq	az641	1965	1:31680
Brolliar gravelly clay loam	Bm	184	1545285	1nvzx	az641	1965	1:31680
Brolliar cobbly loam and alluvial land	Bv	178	1545287	1nvzz	az641	1965	1:31680
Brolliar very stony clay loam, 0 to 10 percent slopes	BrC	68367	1527433	1n8f1	az643	1967	1:31680
Brolliar very stony clay loam, 10 to 30 percent slopes	BrD	20373	1527434	1n8f2	az643	1967	1:31680
Brolliar clay loam, 0 to 5 percent slopes	BlB	5112	1527432	1n8f0	az643	1967	1:31680
Brolliar-Dedal complex, 0 to 8 percent slopes	14	47888	1714830	1vkf3	az675	2009	1:24000
Brolliar cobbly silt loam, 8 to 30 percent slopes	9D	16650	54024	1t6q	az683	1974	1:24000
Brolliar silt loam, 0 to 8 percent slopes	7B	6203	54002	1t60	az683	1974	1:24000
Brolliar cobbly silt loam, 0 to 8 percent slopes	8B	3330	54013	1t6c	az683	1974	1:24000
Brolliar cobbly clay loam, 15 to 30 percent slopes	10D	3097	53921	1t3d	az683	1974	1:24000
Brolliar-Cryorthents-Cryoborolls complex 30 to 50 percent slopes	11E	1775	53927	1t3l	az683	1974	1:24000
Brolliar cobbly clay loam, deep variant, 0 to 5 percent slopes	12	3392	1713033	1vhk4	az693		1:24000
Brolliar stony clay loam, 2 to 8 percent slopes	2A	2391	1713022	1vhjs	az693		1:24000
Brolliar stony clay loam, 0 to 2 percent slopes	2	2125	1713021	1vhjr	az693		1:24000
Brolliar stony clay loam, 8 to 30 percent slopes	2B	1642	1713023	1vhjt	az693		1:24000

Map of Series Extent

Approximate geographic distribution of the BROLLIAR soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2024-10-30).