Soil Data Explorer - BARNABE

Official Series Description

Lab Data Summary

Aggregate lab data for the BARNABE soil series. This aggregation is based on all pedons with a current taxon name of BARNABE, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to BARNABE were used in the calculation. Source: KSSL snapshot (updated 2020-03-13). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the BARNABE soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the BARNABE series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-10-24), parsed OSD records (updated 2024-10-23) and snapshot of SC database (updated 2024-10-23).

Select annual climate data summaries for the BARNABE series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the BARNABE series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with BARNABE share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2024-10-23) and snapshot of the SC database (updated 2024-10-23).

Select annual climate data summaries for the BARNABE series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the BARNABE series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with BARNABE, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2024-10-23).

Block Diagrams

No block diagrams are available.

Map Units

Map units containing BARNABE as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Dipsea-Barnabe very gravelly loams, 50 to 75 percent slopes	120	8905	459412	hf1r	ca041	1979	1:24000
Centissima-Barnabe complex, 50 to 75 percent slopes	112	5140	459404	hf1h	ca041	1979	1:24000
Cronkhite-Barnabe complex, 30 to 50 percent slopes	117	3990	459409	hf1n	ca041	1979	1:24000
Cronkhite-Barnabe complex, 15 to 30 percent slopes	116	3230	459408	hf1m	ca041	1979	1:24000
Cronkhite-Barnabe complex, 50 to 75 percent slopes	118	2515	459410	hf1p	ca041	1979	1:24000
Centissima-Barnabe complex, 30 to 50 percent slopes	111	2470	459403	hf1g	ca041	1979	1:24000
Cronkhite-Barnabe complex, 9 to 15 percent slopes	115	2315	459407	hf1l	ca041	1979	1:24000
Tamalpais-Barnabe variant very gravelly loams, 30 to 50 percent slopes	176	2305	459468	hf3k	ca041	1979	1:24000
Dipsea-Barnabe very gravelly loams, 30 to 50 percent slopes	119	1995	459411	hf1q	ca041	1979	1:24000
Tamalpais-Barnabe variant very gravelly loams, 50 to 75 percent slopes	177	1770	459469	hf3l	ca041	1979	1:24000
Centissima-Barnabe complex, 15 to 30 percent slopes	110	850	459402	hf1f	ca041	1979	1:24000
Barnabe very gravelly loam, 30 to 50 percent slopes	103	830	459395	hf16	ca041	1979	1:24000
Tamalpais-Barnabe variant very gravelly loams, 15 to 30 percent slopes	175	630	459467	hf3j	ca041	1979	1:24000
Dipsea-Urban land-Barnabe complex, 30 to 50 percent slopes	121	505	459413	hf1s	ca041	1979	1:24000
Barnabe-Candlestick complex, 30 to 75 percent slopes	105	7909	455966	h9gl	ca689	1985	1:24000
Candlestick-Barnabe complex, 30 to 50 percent slopes	109	932	455970	h9gq	ca689	1985	1:24000
Barnabe-Rock outrock complex, 15 to 75 percent slopes	106	457	455967	h9gm	ca689	1985	1:24000

Map of Series Extent

Approximate geographic distribution of the BARNABE soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2024-10-30).